Steel Steve

440B

Grade 440B stainless steel is a high carbon martensitic stainless steel containing good strength, moderate corrosion resistance and ability to obtain and maintain wear resistance and excellent resistance. Grade 440B is typically used in measuring instruments, gage blocks, cutlery, knives, dies, molds, ball bearings and valve components. Analysis Carbon 0.75-0.95% Chromium 16.00-18.00% Manganese 1.00% max …

440B Read More »

EN47 Spring Steel Bar

EN47 Round Bar We have extended our range of spring steel bar to include EN47 round bar.  EN47 is Chrome Vanadium steel used in the hardened condition for many applications where high tensile strength, hardness and wear resistance are required. Close equivalents include 50CrV4, 735A51, SAE 6150 Analysis Carbon 0.45-0.55% Silicon 0.50% max Manganese 0.50-0.80% Phosphorous …

EN47 Spring Steel Bar Read More »

Type 420 Stainless

Type 420 Stainless Steel is a martensitic grade providing both outstanding corrosion resistance and exceptional wear resistance. We stock it in a range of thicknesses from 0.10mm to 3.00mm thick in strip and coil. Our stock is hardened and tempered and suitable for flat springs and blades. We can offer a cutting or profiling service. …

Type 420 Stainless Read More »

CS70

CS70 is a high carbon spring steel, and part of the UK designation BS1449. Used in the manufacture of a wide variety of springs, it is normally purchased in the annealed condition. Annealed material allows the steel to be formed and shaped prior to hardening CS70 is equivalent to AISI/ SAE 1070, Din CK67 and …

CS70 Read More »

CS100

Used for springs, saws, clutch plates and valves etc. CS100 can be cut by laser, waterjet etc. It is generally used where higher hardness’s and wear resistance is required  or where a higher strength is required in lower thickness material. Common equivalents are CS95, 1095, C100S, XC90 CS100 is normally supplied in the hardened and …

CS100 Read More »