High speed special tool steel
M2 steel (otherwise W6Mo5Cr4V2 or the same as 1.3343) is a high speed steel in tungsten-molybdenum series.
The carbides in it are small and evenly distributed. It has high wear resistance. After heat treatment, its hardness is the same as T1, but its bending strength can reach 4700 MPa, and its toughness and thermoplasticity are higher than T1 by 50%.
It is usually used to manufacture a variety of tools, such as drill bits, taps and reamers.
M2 Chemical Composition
Carbon – 0.85%
Chromium – 4.1%
Molybdenum – 5%
Vanadium – 1.8%
Tungsten – 6.4%
W6Mo5Cr4V2
1.3343
We stock M2 sheet in a range of thickness:
1.25mm, 1.4mm, 1.45mm, 1.5mm, 1.6m
We do not supply Mill Certificates with orders, we only supply Certificates of Conformity.