CS4 Mild Steel
About CS4 Mild Steel
CS4 is a cold rolled mild steel traditionally used for cold forming.
It is a soft steel with a high ductility level and a low carbon content.
Whilst the advent of newer steels have largely replaced CS4 for a lot of manufacture, it still has benefits where a close thickness tolerance is required or where stiffness is an advantage.
BSS hold a range of CS4 in the full hard rolled condition, with a hardness of 165VPN and tensile strength Rm of 540N/mm².
CS4 is part of BS1449.
CS4 is utilised in standard fabrication and engineering.
It is typically used for the manufacture of shims and washers.
In addition to supplying CS4 in sheet for shim manufacture, BSS can supply laser cut shims – call 0114 244 0527 with your requirements.
|DIN 1624||BS 1449||En10139||%C||%Mn||%Si||%S|
|St4||CS1||DC04||.03 – .06||.18 – .40||.02 max||.02 max|
|St4/RRSt3||CS1/CS3||.04 – .08||.40 max||.03 max||.02 max|
|St2||CS4||DC01||.08 – .13||.30 – .40||.03 max||.03 max|
|–||–||.14 – .17||.60 – .80||.15 – .25||.02 max|
BSS stock CS4 fully hard rolled from .05mm (.0015″ or 48swg) through to 1.63mm (0.064″ or 16 swg).
We do not supply Mill Certificates with orders, we only supply Certificates of Conformity.
Please contact us on 0114 244 0527 (option 2) to make an enquiry.