Introduction

CS100 is a carbon spring steel which BSS supply in sheet form.

Used for springs, saws, clutch plates and valves etc. CS100 can be cut by laser, waterjet etc. It is generally used where higher hardnesses and wear resistance is required  or where a higher strength is required in lower thickness material. Common equivalents are CS95, 1095, C100S, XC90

CS100 is normally supplied in the hardened and tempered condition.

Composition

Carbon Silicon Manganese Sulphur Phosphorus
0.95/1.05% 0.05/0.35% 0.30/0.60% 0.025% max 0.025% max

Our range

We supply CS100 in a range of sheet sizes from 0.1mm to 1mm thick. The hardness range is 475/525 vpn.

Please contact us on 0114 244 0527 (option 2) to make an enquiry.

Equivalent grades

 Common equivalents are CS95, 1095, C100S, XC90

We do not supply Mill Certificates with orders, we only supply Certificates of Conformity.

Please contact us on 0114 244 0527 (option 2) to make an enquiry.

CS100

Used for springs, saws, clutch plates and valves etc. CS100 can be cut by laser, waterjet etc. It is generally used where higher hardness’s and wear resistance is required  or where a higher strength is required in lower thickness material. Common equivalents are CS95, 1095, C100S, XC90

CS100 is normally supplied in the hardened and tempered condition.

 

Carbon Silicon Manganese Sulphur Phosphorus
0.95/1.05% 0.05/0.35% 0.30/0.60% 0.025% max 0.025% max

 

     Sheet Sizes
Width Thickness Length Weight
155 0.10 1000 0.12 kilos
150 0.15 1000 0.20 kilos
165 0.20 1000 0.25 kilos
165 0.25 1000 0.32 kilos
240 0.40 1000 0.75 kilos
300 0.50 2500 2.95 kilos
310 0.70 2500 4.25 kilos
350 0.80 2500 5.50 kilos
450 1.00 1250 4.43 kilos
450 1.00 2500 8.85 kilos
Other sizes available, call to check